SRX Interface Cards
SRX-GP-1DS3-E3
SRX-GP-1DS3-E3
The 1-Port Clear Channel DS3/E3 GPIM functions as a clear channel interface that can support DS3 (T3) or E3 line rates of 44.796 or 34.368 Mbps, respectively. The device does not support channelization, but it supports a subrate DS3/E3 configuration. The DS3/E3 interface is a popular high-bandwidthWAN interface for large ...

SRX-GP-2XE-SFPP-TX
SRX-GP-2XE-SFPP-TX
The 10 Gigabit Ethernet (10GBASE-T), based on the IEEE 802.3a standard, is a telecommunication technology that offers data speeds up to 10 billion bits per second.The 10 Gigabit Ethernet is used to interconnect LANs, WANs, and metropolitan area networks (MANs). The 2-Port 10 Gigabit Ethernet XPIM can provide multiple service ...

SRX-GP-8SFP
SRX-GP-8SFP
The Juniper Networks 8-port small form-factor pluggable transceiver (SFP) XPIM provides high-density Gigabit Ethernet connectivity for the Juniper Networks SRX550 and SRX650 Services Gateway products, increasing flexibility and operational ease.

SRX-MIC-10XG-SFPP
SRX-MIC-10XG-SFPP
You use MICs and MPCs to add different combinations of Ethernet interfaces to your services gateway to suit the specific needs of your network.

SRX-MIC-1X100G-CFP
SRX-MIC-1X100G-CFP
You use MICs and MPCs to add different combinations of Ethernet interfaces to your services gateway to suit the specific needs of your network.

SRX-MIC-20GE-SFP
SRX-MIC-20GE-SFP
You use Modular Interface Cards (MICs) and Modular Port Concentrators (MPCs) to add different combinations of Ethernet interfaces to your services gateway to suit the specific needs of your network.

SRX-MIC-2X40G-QSFP
SRX-MIC-2X40G-QSFP
You use MICs and MPCs to add different combinations of Ethernet interfaces to your services gateway to suit the specific needs of your network.

SRX-MP-1SERIAL-R
SRX-MP-1SERIAL-R
Serial WAN links are bidirectional links and require very few control signals. In a basic serial setup, the data circuit-terminating equipment (DCE) is responsible for establishing, maintaining, and terminating a connection. A modem is a typical DCE device. A serial cable connects the DCE to a telephony network where, ultimately, ...

SRX-MP-1SFP-GE
SRX-MP-1SFP-GE
A Mini-Physical Interface Module (Mini-PIM) is a network interface card (NIC) that is installed on the SRX Series Services Gateway to provide physical connections to a LAN or a WAN. The Mini-PIM receives incoming packets from the network and transmits outgoing packets to the network.

SRX-MP-1T1E1-R
SRX-MP-1T1E1-R
The 1-Port T1/E1 Mini-Physical Interface Module (Mini-PIM) provides the physical connection to T1 or E1 network media types and also performs T1 or E1 framing and line-speed signaling.

SRX-MP-1VDSL2-R
SRX-MP-1VDSL2-R
Very-high-bit-rate digital subscriber line (VDSL) technology is part of the xDSL family of modem technologies, which provide faster data transmission over a single flat untwisted or twisted pair of copper wires. The 1-Port VDSL2 Annex A Mini-PIM carries the Ethernet backplane. When the Mini-PIM is plugged into the chassis, the ...

SRX-MP-8GSHDSL
SRX-MP-8GSHDSL
A 8-wire (4-pair) G.SHDSL Mini-Physical Interface Module (Mini-PIM) is a network interface card (NIC) that is installed on the SRX Series Services Gateway to provide physical connections to a LAN or a WAN. The Mini-PIM receives incoming packets from the network and transmits outgoing packets to the network.

SRX-MP-VA04
SRX-MP-VA04
A SRX-MP-VA04 Mini-Physical Interface Module (Mini-PIM) is installed on the SRX Series Services Gateway to provide physical connections. The Mini-PIM receives incoming packets from the network and transmits outgoing packets to the network.

SRX-MP-VA22
SRX-MP-VA22
A SRX-MP-VA22 Mini-Physical Interface Module (Mini-PIM) is installed on the SRX Series Services Gateway to provide physical connections. The Mini-PIM receives incoming packets from the network and transmits outgoing packets to the network.

SRX-MP-VA40
SRX-MP-VA40
A Mini-Physical Interface Module (Mini-PIM) is a network interface card (NIC) that is installed on the SRX Series Services Gateway to provide physical connections to a LAN or a WAN. The Mini-PIM receives incoming packets from the network and transmits outgoing packets to the network.
